Meet the dazzling flying machines of the future Raffaello DAndrea

What started as a platform for hobbyists

is poised to become
a multibillion-dollar industry.

Inspection, environmental monitoring,
photography and film and journalism:

these are some of the potential
applications for commercial drones,

and their enablers
are the capabilities being developed

at research facilities around the world.

For example, before aerial
package delivery

entered our social consciousness,

an autonomous fleet of flying machines
built a six-meter-tall tower

composed of 1,500 bricks

in front of a live audience
at the FRAC Centre in France,

and several years ago,
they started to fly with ropes.

By tethering flying machines,

they can achieve high speeds
and accelerations in very tight spaces.

They can also autonomously build
tensile structures.

Skills learned include how to carry loads,

how to cope with disturbances,

and in general, how to interact
with the physical world.

Today we want to show you some
new projects that we’ve been working on.

Their aim is to push the boundary
of what can be achieved

with autonomous flight.

Now, for a system to function
autonomously,

it must collectively know the location
of its mobile objects in space.

Back at our lab at ETH Zurich,

we often use external cameras
to locate objects,

which then allows us to focus our efforts

on the rapid development
of highly dynamic tasks.

For the demos you will see today, however,

we will use new localization technology
developed by Verity Studios,

a spin-off from our lab.

There are no external cameras.

Each flying machine uses onboard sensors
to determine its location in space

and onboard computation
to determine what its actions should be.

The only external commands
are high-level ones

such as “take off” and “land.”

This is a so-called tail-sitter.

It’s an aircraft that tries
to have its cake and eat it.

Like other fixed-wing aircraft,
it is efficient in forward flight,

much more so than helicopters
and variations thereof.

Unlike most other
fixed-wing aircraft, however,

it is capable of hovering,

which has huge advantages
for takeoff, landing

and general versatility.

There is no free lunch, unfortunately.

One of the limitations with tail-sitters

is that they’re susceptible
to disturbances such as wind gusts.

We’re developing new control
architectures and algorithms

that address this limitation.

The idea is for the aircraft to recover

no matter what state it finds itself in,

and through practice,
improve its performance over time.

(Applause)

OK.

When doing research,

we often ask ourselves
fundamental abstract questions

that try to get at the heart of a matter.

For example, one such question would be,

what is the minimum number of moving parts
needed for controlled flight?

Now, there are practical reasons

why you may want to know
the answer to such a question.

Helicopters, for example,

are affectionately known
as machines with a thousand moving parts

all conspiring to do you bodily harm.

It turns out that decades ago,

skilled pilots were able to fly
remote-controlled aircraft

that had only two moving parts:

a propeller and a tail rudder.

We recently discovered
that it could be done with just one.

This is the monospinner,

the world’s mechanically simplest
controllable flying machine,

invented just a few months ago.

It has only one moving part, a propeller.

It has no flaps, no hinges, no ailerons,

no other actuators,
no other control surfaces,

just a simple propeller.

Even though it’s mechanically simple,

there’s a lot going on
in its little electronic brain

to allow it to fly in a stable fashion
and to move anywhere it wants in space.

Even so, it doesn’t yet have

the sophisticated algorithms
of the tail-sitter,

which means that in order
to get it to fly,

I have to throw it just right.

And because the probability
of me throwing it just right is very low,

given everybody watching me,

what we’re going to do instead

is show you a video
that we shot last night.

(Laughter)

(Applause)

If the monospinner
is an exercise in frugality,

this machine here, the omnicopter,
with its eight propellers,

is an exercise in excess.

What can you do with all this surplus?

The thing to notice
is that it is highly symmetric.

As a result, it is ambivalent
to orientation.

This gives it an extraordinary capability.

It can move anywhere it wants in space

irrespective of where it is facing

and even of how it is rotating.

It has its own complexities,

mainly having to do
with the interacting flows

from its eight propellers.

Some of this can be modeled,
while the rest can be learned on the fly.

Let’s take a look.

(Applause)

If flying machines are going
to enter part of our daily lives,

they will need to become
extremely safe and reliable.

This machine over here

is actually two separate
two-propeller flying machines.

This one wants to spin clockwise.

This other one wants
to spin counterclockwise.

When you put them together,

they behave like one
high-performance quadrocopter.

If anything goes wrong, however –

a motor fails, a propeller fails,
electronics, even a battery pack –

the machine can still fly,
albeit in a degraded fashion.

We’re going to demonstrate this to you now
by disabling one of its halves.

(Applause)

This last demonstration

is an exploration of synthetic swarms.

The large number of autonomous,
coordinated entities

offers a new palette
for aesthetic expression.

We’ve taken commercially available
micro quadcopters,

each weighing less
than a slice of bread, by the way,

and outfitted them
with our localization technology

and custom algorithms.

Because each unit
knows where it is in space

and is self-controlled,

there is really no limit to their number.

(Applause)

(Applause)

(Applause)

Hopefully, these demonstrations
will motivate you to dream up

new revolutionary roles
for flying machines.

That ultrasafe one over there for example

has aspirations to become
a flying lampshade on Broadway.

(Laughter)

The reality is that it is
difficult to predict

the impact of nascent technology.

And for folks like us, the real reward
is the journey and the act of creation.

It’s a continual reminder

of how wonderful and magical
the universe we live in is,

that it allows creative, clever creatures

to sculpt it in such spectacular ways.

The fact that this technology

has such huge commercial
and economic potential

is just icing on the cake.

Thank you.

(Applause)