Why arent we only using solar power Alexandros George Charalambides

We have some good reasons to completely

switch over to solar power.

It’s cheaper in many cases,

and definitely more sustainable

than our dependance on traditional power plants

that use resources like coal,

which will eventually run out.

So why don’t we replace these

traditional plants with solar energy?

Because there’s one factor that makes

solar power very unpredictable:

cloud cover.

As the sun’s rays move towards Earth,

some get absorbed by the Earth’s atmosphere,

some are reflected back into outer space,

but the rest make it to the Earth’s surface.

The ones that aren’t deviated

are called direct irradiance.

The ones that are deflected by clouds

are called diffuse irradiance.

And those rays that first get reflected by a surface,

like a nearby building,

before reaching the solar energy system

are called reflected irradiance.

But before we can examine how clouds

affect the sun’s rays and electricity production,

let’s see how these solar energy systems work.

First up, we have solar towers.

These are made up of a central tower

surrounded by a huge field of mirrors

that track the sun’s path and focus

only the direct rays onto a single point on the tower,

kind of like an eager beachgoer.

The heat generated by these rays

is so immense that it can be used to boil water

producing steam that drives a traditional turbine,

which makes electricity.

But when we say solar energy systems,

we’re usually talking about photovoltaics,

or solar panels,

which are the systems most commonly used

to generate solar power.

In solar panels,

photons from the sun’s rays hit the surface of a panel,

and electrons are released

to get an electric current going.

Solar panels can use all types of irradiance,

while solar towers can only use direct irradiance,

and this is where clouds become important

because depending on their type and location

relative to the sun,

they can either increase or decrease

the amount of electricity produced.

For instance, even a few cumulus clouds

in front of the sun can reduce

the electricity production in solar towers

to almost zero because of this dependence on direct rays.

In solar panels, those clouds would decrease

energy output as well,

though not as much

because solar panels can use all types of irradiance.

However, all this depends on the clouds exact positioning.

Due to reflection, or a particular phenomeon

called Mie scattering,

the sun’s rays can actually be focused forward

by clouds to create a more than 50% increase

in the solar irradiance reaching a solar panel.

If this potential increase isn’t accounted for,

it could damage the solar panel.

Why does this matter?

Well, you wouldn’t want this lesson to stop

just because a cloud passed over the panel on your roof.

In solar towers, huge tanks of molten salt or oil

can be used to store any excess heat

and use it when needed,

so that’s how they manage the problem

of fluctuating solar irradiance to smooth out

electricity production.

But in the case of solar panels,

there currently isn’t any way to affordably

store extra energy.

That’s where traditional power plants come in

because to correct for any fluctuations

in these solar powered plants,

extra electricity from traditional sources

always needs to be available.

But then why aren’t these tradtional power plants

just used as a backup,

instead of us humans depending on them

as our main sources of energy?

Because it’s impossible for an employee

at a coal fired or a nuclear plant

to turn a knob to produce

more or less electricity depending

on how many clouds there are in the sky.

The response time would simply be too slow.

Instead, to accommodate these fluctuations,

some extra electricity from traditional power plants

is always being produced.

On clear sky days,

that extra electricity might be wasted,

but when cloudy skies prevail,

it’s what fills the gap.

This is what we currently depend on

for a constant supply of energy.

For this reason, a lot of researchers

are interested in forcasting the motion

and formation of clouds through satellite images

or cameras that look up at the sky

to maximize the energy from solar power plants

and minimize energy waste.

If we could accomplish that,

you’d be able to enjoy this video

powered solely by the sun’s rays,

no matter what the weather,

although if the sun is shining,

you may be tempted to venture outside

to go and do a different kind of cloud gazing.

我们有充分的理由完全

改用太阳能。

在许多情况下,它更便宜,

而且绝对

比我们对

使用煤炭等资源的传统发电厂的依赖更具可持续性,

后者最终会耗尽。

那么我们为什么不用太阳能取代这些

传统植物呢?

因为有一个因素使

太阳能变得非常不可预测:

云量。

当太阳光线向地球移动时,

一些被地球大气层吸收,

一些被反射回外层空间,

但其余的则到达地球表面。

不偏离

的称为直接辐照度。

被云偏转的

那些称为漫射辐照度。

那些在到达太阳能系统之前首先被表面(

例如附近的建筑物)反射的光线

称为反射辐照度。

但在我们研究云如何

影响太阳光线和电力生产之前,

让我们看看这些太阳能系统是如何工作的。

首先,我们有太阳能塔。

它们由一个中央塔组成,

周围环绕着一大片镜子

,这些镜子跟踪太阳的路径,

只将直射光线聚焦在塔上的一个点上,

有点像热心的海滩游客。

这些射线产生的热量

非常巨大,可以用来煮沸水,

产生蒸汽,驱动传统的涡轮机,

从而发电。

但是当我们说太阳能系统时,

我们通常谈论的是光伏

或太阳能电池板,

它们是最常

用于产生太阳能的系统。

在太阳能电池板中,

来自太阳光线的光子撞击电池板表面,

并释放电子

以产生电流。

太阳能电池板可以使用所有类型的辐照度,

而太阳能塔只能使用直接辐照度

,这就是云变得重要的地方,

因为根据它们的类型和

相对于太阳的位置,

它们可以增加或

减少产生的电量。

例如,即使是

太阳前面的一些积云也可以将

太阳能塔的发电量减少

到几乎为零,因为这种依赖于直射光线。

在太阳能电池板中,这些云也会减少

能量输出,

尽管没有那么多,

因为太阳能电池板可以使用所有类型的辐照度。

然而,这一切都取决于云的准确定位。

由于反射或

称为米氏散射的特殊现象

,太阳光线实际上可以

被云层向前聚焦,从而

使到达太阳能电池板的太阳辐照度增加 50% 以上。

如果不考虑这种潜在的增加,

它可能会损坏太阳能电池板。

为什么这很重要?

好吧,你不会希望这节课

因为一朵云从你屋顶的面板上掠过而停止。

在太阳能塔中,巨大的熔盐或油罐

可用于储存多余的热量

并在需要时使用

,这就是他们如何解决

太阳辐照度波动问题以平稳

发电的方式。

但就太阳能电池板而言,

目前没有任何方法可以经济地

储存额外的能量。

这就是传统发电厂的用武之地,

因为要纠正

这些太阳能发电厂的任何波动,总是需要提供

来自传统来源的额外电力

但是为什么这些传统的发电厂不

只是作为备用,

而不是我们人类依赖它们

作为我们的主要能源呢?

因为

燃煤电厂或核电厂的员工不可能根据天空中有多少云

来转动旋钮以产生

更多或更少的电力

响应时间太慢了。

相反,为了适应这些波动,

传统发电厂总是会产生一些额外的电力

在晴朗的日子里

,多余的电力可能会被浪费掉,

但当多云的天空盛行时,

它就会填补空白。

这是我们目前

依赖的持续能源供应。

出于这个原因,许多研究人员

有兴趣

通过卫星图像

或仰望天空的相机来预测云的运动和形成,

以最大限度地利用太阳能发电厂的能量

并最大限度地减少能源浪费。

如果我们能做到这一点,

那么无论天气如何,您都可以享受

仅由太阳光线驱动的视频

尽管如果阳光明媚,

您可能会想冒险

到户外去做不同类型的 云凝视。